Impedance Matching for Monster Cable MSS4 Speaker Selector

Impedance Matching for Monster Cable MSS4 Speaker Selector

Terry, With a speaker selector that already has impedance matching, you only need standard volume controls. No need to match twice. You can use these volume controls just fine. As for speaker recommendations, in the budget range of things, the MAS Audio stuff is the best value and for the better of the upper end take a look at the JA Audio Aluminum Series. 6 1/2″ is the kind of standard size for background listening. If you like it a little louder, then an 8″ would be a better choice for you. Brian
I am planning a multiple speaker installation. I currently have a Monster Cable MSS4 speaker selector but need to order speakers and volume controls. Do I need impedance matching volume controls with this selector? I`ll be using 4 sets of ceiling speakers driven by an 80 watt/channel Onkyo receiver to play CD and FM music throughout my house. Can you recommend volume controls and speakers for this application. Thanks, Terry Jednaszewski

    • Related Articles

    • What is Impedance Matching?

      To match impedance means to take a group of speakers (usually more than three pairs) and forcing the combined impedance of the speakers to maintain an even 8 ohm level (or another number if required). Impedance means 'the  resistance of an electric ...

    • Speaker selector recommendations

      Jim, To say the least...yes you`ll be pleased with the sound from those JAC6A's, especially comparing them to the Radio Shack stuff. A speaker selector will take care of the impedance matching in your system. You`ll need just standard volume ...

    • Impedance matching for whole house audio

      Russell, You need some kind of "impedance matching". Both speaker selectors and volume controls "can" perform this function for you. The best way to go about designing a system is with a speaker selector and non-impedance matching volume controls. In ...

    • Impedance matching for speaker sets

      Ken, It is impedance matching selectable. So you can use it for two pairs. But keep in mind if you`re using it with others in a system, there will be a bottleneck at that area. If possible use two volume controls inthe same box with the inputs tied ...

    • Speaker selector with volume controls

      Dave, You only need impedance matching in one place. When using a speaker selector, that`s your impedance matching device. You then just use standard volume controls. Name : Dave Message : I would like to use a 6 pair speaker selector with impedance ...