Impedance matching for speaker sets

Impedance matching for speaker sets

Ken, It is impedance matching selectable. So you can use it for two pairs. But keep in mind if you`re using it with others in a system, there will be a bottleneck at that area. If possible use two volume controls inthe same box with the inputs tied together and you`ll avoid the bottleneck.
Name : Ken Jomo Message : I am interested in the Custom Audio CA100SLW 100 Watt Slider Style Volume Control it is impedeance matching. Can I use 1 for 2 sets of speakers or do I need 2 in a series.Please let me know ASAP as I need to purchase immediatly. Thank You Ken Jomo

    • Related Articles

    • What is Impedance Matching?

      To match impedance means to take a group of speakers (usually more than three pairs) and forcing the combined impedance of the speakers to maintain an even 8 ohm level (or another number if required). Impedance means 'the  resistance of an electric ...

    • Impedance Matching for Monster Cable MSS4 Speaker Selector

      Terry, With a speaker selector that already has impedance matching, you only need standard volume controls. No need to match twice. You can use these volume controls just fine. As for speaker recommendations, in the budget range of things, the MAS ...

    • Impedance matching for whole house audio

      Russell, You need some kind of "impedance matching". Both speaker selectors and volume controls "can" perform this function for you. The best way to go about designing a system is with a speaker selector and non-impedance matching volume controls. In ...

    • What Impedance Matching Volume Control Do You Recommend?

      Frank, Your situation depends more on what type of receiver you have than what type of speakers you have. On a receiver, you generally have provisions for an “A” pair and “B” pair of speakers. If you are running just the two pairs of speakers, you ...

    • Impedance Question

      Doug, You only have to match impedance at one place, either the speaker selector OR the volume control. Name : Doug Message : Hello, Couldn`t find this question in the FAQ`s, hopefully not because it`s a lame question... Do I need an impedence ...