JACC5A speaker fit

JACC5A speaker fit

Dan, Kinda. It fits between the studs by cutting off the end dog ears (mounting clips), cutting the drywall off the top of the studs and screwing directly into the studs. The only problem is getting the screen centered on the particular stud bay that the speaker has to go on.
Name : Dan Doster Message : Will the JACC5A speaker fit lengthways between 16" on center studs for use as a center speaker?

    • Related Articles

    • Speaker package contents

      Michael, 1. The foam is for the screws if they rattle. The tar is for the speaker grill if it doesn't fit snugly. 2. If possible, stuff the un-insulated wall with some bat insulation to even out the two sides. The liners available constrict the air ...

    • Speaker Sizes

      David, The difference in location is type of usage of the room. A social area where you'll be walking around and not really stuck in one place, will like to have ceiling speakers, like kitchens, entry ways, dining rooms, etc. Placement will just be ...

    • Speaker cover inquiry

      Lenir, Sorry we don't carry just the speaker covers. Try this site: https://www.speakerworks.com/Custom-Speaker-Grill-and-Speaker-Covers-s/89.htm Name : Lenir Drake Message : I would like to buy two wall/ceiling speaker covers (just the screen) ...

    • Speaker selector recommendations

      Jim, To say the least...yes you`ll be pleased with the sound from those JAC6A's, especially comparing them to the Radio Shack stuff. A speaker selector will take care of the impedance matching in your system. You`ll need just standard volume ...

    • Old speaker wiring

      Bob, The volume controls are mandatory in any installation. We don`t have volume controls that are mounted in the speakers, that's kind of an old school type of commercial sound setup. They may still be around but unlikely. You can make a bank of ...