Speaker Selector and Dual Voice Coil Speaker Question

Speaker Selector and Dual Voice Coil Speaker Question

Kevin, The speaker selector is what you need. It sounds like just a 4 pair selector will do. Something like this should be fine. It's not too much of a load for most all receivers. The only thing to look for is to make sure your amplifier/receiver will operate with an 8 ohm load. It might say something like use only 8 ohm speakers. If it mentions 4 ohm speakers it's fine as well...the lower the number on a receiver/amp the better. As for a single speaker in the bathroom, use a dual voice coil speaker like these. They take both a left and right feed and plays out of the single speaker.
Name : Kevin Kellogg Message : Hi, I have a stereo system with just two speakers, I want to extend this to have a single speaker in the bathroom and two more speakers in the Kitchen. How is the best way to handle this addition? I have looked at the switches to select speakers, but how much is too much of a load? Also, in what manner do I hook up that single bathroom speaker? Thanks, Kevin Kellogg

    • Related Articles

    • Dual voice coil speakers for office

      Garrett, The dual vc stuff works fine for your application. I would probably suggest installing them directly over the chairs if not just slightly ahead of them for placement. The space above is fine, the ceiling stuff like infinite baffle locations. ...

    • Dual voice coil speakers and impedance matching volume controls

      Rick, It will work fine with impedance matching volume controls. Order either these: http://www.inwallstore.com/ca100slw.html or http://www.inwallstore.com/slvc75dopt.html Name : Rick Garcia} Message : I want to put 4 daul voice speakers Ja Audio ...

    • Volume control panel for office

      Joe, To save money on installs like this, what you do is take the 8 to 10 volume controls (impedance matching) and put them in your control area in a homemade box that you make 8-10 gang long or mount them in a wall in that area in maybe two 4 gang ...

    • Volume control panel for office

      Joe, To save money on installs like this, what you do is take the 8 to 10 volume controls (impedance matching) and put them in your control area in a homemade box that you make 8-10 gang long or mount them in a wall in that area in maybe two 4 gang ...

    • Dual Woofer Speaker Advantages

      In 1987, Pro-Logic, a breakthrough technology for surround sound processing, was introduced.  Inside it, a sound decoder breaks down sound into the different components making up the surround sound set up. That's to the left speaker, the right ...