Speaker selector with volume controls

• Related Articles

• Speaker selector with volume controls

  Dave, You only need impedance matching in one place. When using a speaker selector, that`s your impedance matching device. You then just use standard volume controls. Name : Dave Message : I would like to use a 6 pair speaker selector with impedance ...

• Speaker selector recommendations

  Jim, To say the least...yes you`ll be pleased with the sound from those JAC6A's, especially comparing them to the Radio Shack stuff. A speaker selector will take care of the impedance matching in your system. You`ll need just standard volume ...

• Why Do I Need a Speaker Selector?

  Typically, in a home situation we suggest a speaker selector with standard volume controls. That’s because you can turn off areas that you wouldn’t normally use. Those areas truly get taken out of the circuit and in doing so; the other areas get more ...

• Speaker selector for whole house audio

  George, You can do either. The advantage of the speaker selector and standard volume controls is that when you unselect a speaker area at the selector, that pair is taken out of the circuit completely allowing power to flow to the other areas that ...

• Speaker selector for inside and outside speakers

  Gina, You just need a speaker selector...it sounds like a 4 pair type. You'll hook up the selector to just the A set of speaker outputs from the Sony and then all the speakers go into the speaker selector box. Take a look at this one for a ...