Volume control for 2 speakers

Volume control for 2 speakers

Ryan, The Audioplex volume controls tout that they fit into standard J-box depths. Take a look at these under Audioplex:http://www.inwallstore.com/category_s/138.htm You'll want a standard volume control with no impedance matching. So look at the ones without the "OPT" option in Audioplex.
Name : Ryan Kraemer Message : Dear Sir or Madam, My house is 11 years old and when it was built we had speakers built into the wall in various rooms in the house. The speakers throughout the house are controlled by a 6 pair speaker switcher connected to the audio receiver and cd changer. At each location where the speakers are, they are controlled by a simple volume control to adjust the sound in each location. I`m looking for a volume control that will work with a set of in wall speakers (2 speakers). The depth of the electrical box that it is in currently is 2 1/4". Do you have anything that will work as described above. Thanks for you time. Ryan Kraemer

    • Related Articles

    • Dual volume control switch

      Darren, The best way to control two pairs of speakers is to use a dual gang outlet and have two volume controls in there with a decora cover plate to finish. If you use just one volume control (which you can do), you end up having a bottle neck there ...

    • Volume control for double box

      Bill, Sure, it's easier than you think. You just use 2 decora style volume controls and go get a double gang decora cover plate to place over both. These would work fine if you want a suggestion. Name : Bill Jones Message : I have two sets of ...

    • Volume control panel for office

      Joe, To save money on installs like this, what you do is take the 8 to 10 volume controls (impedance matching) and put them in your control area in a homemade box that you make 8-10 gang long or mount them in a wall in that area in maybe two 4 gang ...

    • Volume control panel for office

      Joe, To save money on installs like this, what you do is take the 8 to 10 volume controls (impedance matching) and put them in your control area in a homemade box that you make 8-10 gang long or mount them in a wall in that area in maybe two 4 gang ...

    • Volume Control True Off Position

      David, Nope. None of the impedance matching versions out there will have a true off setting, where it totally disconnects from the circuit. This is because the function of the impedance matching is that the whole circuit needs to remain constant. ...