Why Do Center Channel Speakers Look Like They Do?
Center channel speakers have a different look to them for a few reasons. It all began way back in the late 80's when Dolby began licensing their surround sound for home use in the form of 'Dolby Pro Logic.' That was when surround sound went mainstream. VCR tape rentals were well under way and the consumer electronics industry was all abuzz with this new toy.
Back then, Dolby proposed a system of speakers that would roughly replicate the experience of a movie theater right in your living room. It would be 4 channels of surround, front left, front center, front right and a shared mono rear channel divided into two speakers for the back left and right. Some had a subwoofer channel, but most used the front speakers as big ole' floor standing speakers. It's noteworthy that during this time, Bose was just starting their revolution of subwoofer and satellite systems.
[caption id="attachment_523" align="aligncenter" width="300"]
"Traditional" center channel speakers look like this[/caption]
So Dolby made center channel speakers for our odd-shaped living/family rooms. There was only one sweet spot for listening in the middle of the sofa in the middle of the room. What about little Joey who had to sit on the other couch on the side of the room right in front of that big ole' floor speaker? The whole movie would sound like it was coming from that one speaker.
Then came the idea about the center channel speaker. It was to broadcast the dialog of the movie track. All the action and things that happened on screen now would sound like they came from the screen and Joey could enjoy the movie from his odd sitting place.
Center channel speakers had to go on top of the TV. The consumer electronics industry knew that another big ole' speaker on top of the TV wouldn't work, so they made the speaker longer and with a lower profile by putting 2 smaller woofers instead of one larger one on the same plane in the same box. Now they could get the sound of a 6 1/2" woofer out of two 4" speakers by wiring them together and combining their effective surface areas.
So we all had TVs in the living room and they were getting bigger and bigger. But most of us still had a tube style TV 35" or under. Putting a speaker on a tube type TV is a problem. Tube type TV's have a permanent layer of phosphor just behind the glass on the screen that is affected by magnetic fields (the back of a speaker generally has a large magnet). The industry took care of this problem by putting a metal shield around each of the magnets in the speaker array and voila`: center channel speakers are born.
Flip forward in time to present day electronics. We have improved our theaters greatly. We now have big screens that are not made from phosphor but from exotic materials like plasma, LCD, rear projection CRT and front projectors. The beauty of these new technologies is that none are affected by magnetic fields. Also, most of these are designed to be very thin in depth.
And what do our center channel speakers look like now? Unfortunately, center channel speakers still hold onto their roots. And many of the salespeople on the floor of the large "big box" stores will continue to tell you that center channel speakers are the most important speaker in the array and that's why it looks the way it does and that's why it has two speakers in it.
The new surround technologies from Dolby and other brands still employ the same basic array of speakers surrounding you, but now all the speaker locations have discrete or dedicated channels with the full spectrum of audio (lows to highs) coming from each location. Movie producers know this and can use these channels in any way they like to enhance their movie's presence in your theater.
There are no more important (ie. center channel speakers) or less important (ie. rear surround channel speakers) speakers any longer. All are important. That's why using the same driver in all positions is recommend. You get a certain dynamic or tightness to the field of sound when you are using the same driver all the way around.
"Traditional" center channel speakers look like this[/caption]
So Dolby made center channel speakers for our odd-shaped living/family rooms. There was only one sweet spot for listening in the middle of the sofa in the middle of the room. What about little Joey who had to sit on the other couch on the side of the room right in front of that big ole' floor speaker? The whole movie would sound like it was coming from that one speaker.
Then came the idea about the center channel speaker. It was to broadcast the dialog of the movie track. All the action and things that happened on screen now would sound like they came from the screen and Joey could enjoy the movie from his odd sitting place.
Center channel speakers had to go on top of the TV. The consumer electronics industry knew that another big ole' speaker on top of the TV wouldn't work, so they made the speaker longer and with a lower profile by putting 2 smaller woofers instead of one larger one on the same plane in the same box. Now they could get the sound of a 6 1/2" woofer out of two 4" speakers by wiring them together and combining their effective surface areas.
So we all had TVs in the living room and they were getting bigger and bigger. But most of us still had a tube style TV 35" or under. Putting a speaker on a tube type TV is a problem. Tube type TV's have a permanent layer of phosphor just behind the glass on the screen that is affected by magnetic fields (the back of a speaker generally has a large magnet). The industry took care of this problem by putting a metal shield around each of the magnets in the speaker array and voila`: center channel speakers are born.
Flip forward in time to present day electronics. We have improved our theaters greatly. We now have big screens that are not made from phosphor but from exotic materials like plasma, LCD, rear projection CRT and front projectors. The beauty of these new technologies is that none are affected by magnetic fields. Also, most of these are designed to be very thin in depth.
And what do our center channel speakers look like now? Unfortunately, center channel speakers still hold onto their roots. And many of the salespeople on the floor of the large "big box" stores will continue to tell you that center channel speakers are the most important speaker in the array and that's why it looks the way it does and that's why it has two speakers in it.
The new surround technologies from Dolby and other brands still employ the same basic array of speakers surrounding you, but now all the speaker locations have discrete or dedicated channels with the full spectrum of audio (lows to highs) coming from each location. Movie producers know this and can use these channels in any way they like to enhance their movie's presence in your theater.
There are no more important (ie. center channel speakers) or less important (ie. rear surround channel speakers) speakers any longer. All are important. That's why using the same driver in all positions is recommend. You get a certain dynamic or tightness to the field of sound when you are using the same driver all the way around.Related Articles
Center Channel Question
Scott, Not necessarily better...or worse for that matter. When you have an identical speaker in all locations you get a certain tightness to the sound by timbre matching all the drivers exactly. While you`re not changing too much with the center ...Should I Build a Box for my Inwall and Ceiling Speakers?
Inwall speakers and inceiling speakers typically do not need to have boxes built or spaces constricted. These types of speakers are designed with American homes in mind. That means that the makers of these speakers know that your house uses 2 x 4 ...InwallTech® Speakers: What Do They Sound Like?
This has turned into the most asked question we get about InwallTech Speakers via chat, email, and by phone. To answer this question, let's take a look at this illustration: The image above provides a graphical comparison of two variables: the three ...High Power Inwall Speakers
Russell and Shannon, First take a look at this page about pre-construction brackets. Then, if you're looking for a system with high-power in-wall speakers, look at these under the brand InwallTech and this one for your theater. As for the rest of the ...How to Install Ceiling and Wall Speakers
If you are building a new residential or a commercial structure, or if you're remodeling an existing property, now is the time to plan for a Music Distribution System. It's easier than you may expect. All you need to start is an existing Hi-Fi Stereo ...