JBL control 126w with JBL 6.5

JBL control 126w with JBL 6.5

Tony, Looks like the "W" version is the same as the HTI series we have. The "WT" version has a 70V transformer built in for a commercial 70V system. See this link here for a spec sheet on the Control version: http://www.jblpro.com/Controll_100_Series/ They are technically the best sounding speakers we have. However, depending on application, they may not always be the right pick. If you're doing home theater, then yes they are the best ones we recommend. If you`re just doing whole house audio and your listening habits are mainly just fill type music, then take a look at the aluminum series from JA Audio: http://www.inwallstore.com/jabrand.html
Name : Tony PFarr Message : I have been looking at the JBL control 126w 6.5 inch in-wall speakers. Do you know how these compare to the JBL 6.5 speakers that you sell? The control is their professional series and the ones you list are in the home series. Have you heard the control models? Any help would be appreciated. Also, are the JBL`s your highest quality speaker? Are they the speaker that you would recommend above the other brands? Thanks! Tony.

    • Related Articles

    • Home theater installation for JBL

      Richard, Yes, the HTI is a very good choice for inwall speakers. Not too much money and just about the best sound before topping out the performance of the compressed chalk we mount them in. The insulation is not a problem. But if you are using an ...

    • Home theater installation for JBL

      Richard, Yes, the HTI is a very good choice for inwall speakers. Not too much money and just about the best sound before topping out the performance of the compressed chalk we mount them in. The insulation is not a problem. But if you are using an ...

    • Volume control panel for office

      Joe, To save money on installs like this, what you do is take the 8 to 10 volume controls (impedance matching) and put them in your control area in a homemade box that you make 8-10 gang long or mount them in a wall in that area in maybe two 4 gang ...

    • Volume control panel for office

      Joe, To save money on installs like this, what you do is take the 8 to 10 volume controls (impedance matching) and put them in your control area in a homemade box that you make 8-10 gang long or mount them in a wall in that area in maybe two 4 gang ...

    • Volume Control True Off Position

      David, Nope. None of the impedance matching versions out there will have a true off setting, where it totally disconnects from the circuit. This is because the function of the impedance matching is that the whole circuit needs to remain constant. ...